Reduce charging clutter without losing performance with Chargeasap's new portable powerhouse! The Flash Pro Plus 6-in-1 charging solution with three USB-C PD 3.0 ports and one USB-A (output only) port with 50 watts power delivery specifically designed for OPPO SuperVOOC charging, OnePlus Warp Charge, Vivo FlashCharge, Apple FastCharge and HUAWEI SuperCharge.
The USB-C port on the far left side supports 100 watts
PPS power delivery, as well as input capability for charging the Flash Pro Plus. The other two
USB-C ports are output only and support 20 watts PPS power delivery and 60
watts power delivery respectively. On top of the Flash Pro
Plus, there are two wireless charging pad rings.
The largest wireless charging ring (5cm diameter) has a magnetic backing and, it is Apple MagSafe compatible (up t 15 watts) and Android Qi charging compatible (up to 7.5W watts). You can wirelessly charge a MagSafe iPhone (e.g. iPhone 12 Pro) while staying magnetically connected to the Flash Pro Plus. You can also wirelessly charge older iPhone models (e.g.iPhone 8 or later), as well as an AirPods wireless charging case in about 75 minutes (60 minutes via the USB-A port). The Flash Pro Plus smaller wireless charging ring (2.5cm) is also magnetic and has a maximum power delivery of 5 watts. It is designed for an Apple Watch only so, it does not support any other smart watches including Samsung Watch.
The largest wireless charging ring (5cm diameter) has a magnetic backing and, it is Apple MagSafe compatible (up t 15 watts) and Android Qi charging compatible (up to 7.5W watts). You can wirelessly charge a MagSafe iPhone (e.g. iPhone 12 Pro) while staying magnetically connected to the Flash Pro Plus. You can also wirelessly charge older iPhone models (e.g.iPhone 8 or later), as well as an AirPods wireless charging case in about 75 minutes (60 minutes via the USB-A port). The Flash Pro Plus smaller wireless charging ring (2.5cm) is also magnetic and has a maximum power delivery of 5 watts. It is designed for an Apple Watch only so, it does not support any other smart watches including Samsung Watch.
While most powerbanks use lipo (lithium-polymer) or li-ion (lythium ion) batteries, the Flash Pro Plus uses Panasonic's new 21700 Tesla battery technology (graphene blend lithium polymer), which has a higher charge/discharge rate and higher lifespan than the standard Panasonic 21700 li-ion batteries available on the market.
The Panasonic Tesla batteries do not lose performance or storage capacity until after 2000 charge/discharge cycles. Other benefits of graphene-infused li-ion batteries is better heat handling (less likely to explode), making the Flash
Pro Plus safer than a standard lithium ion power bank. Speaking of
safety, the Flash Pro Plus also integrates various protections to
prevent overcharging, overvoltage, overcurrent and short circuit.
The
higher density of the Tesla Panasonic graphene batteries provides
another distinctive benefit and that is a higher power distribution,
which allows the Flash Pro Plus to be able to output full power via the
three USB-C ports (100W, 20W and 60W) when charging three devices at the
same time. When charging four or more devices at the same time, the 100
watt USB-C port gets capped to 60 watts. The included user guide shows a
detailed power distribution breakdown.
The
Flash Pro Plus weighs 585 grams and measures 16cm long, 8.5cm wide and 3cm thick. It has a metal enclosure
made of anodized
7075 aluminum alloy, which is durable and acts as a heatsink helping to
dissipate heat quickly. The enclosure integrates a 1.3 inch oled screen
display (3.5cm x 2.5cm), which shows real time battery percentage
remaining, power output per port (in Watts and
Amps) and charge temperature.
The oled display cannot be turned off
manually. It has been programmed to turn off automatically
after 25
seconds when there is no load (no devices connected). When there is
load, the oled display automatically turns off after 5 minutes. There is
one physical clicky button (side facing) for activating wireless
charging.
When
using a 100 watt power adapter (not included), Flash Pro Plus recharges
from 0% to 100% in 70 minutes and to 80% in just 45
minutes. Flash Pro Plus also supports pass-through charging, so you can recharge the powerbank whilst charging devices. Like
all powerbanks, the Flash Pro Plus experiences conversion
loss (~20%), which means the real storage capacity (18,500 mAh) will be lower
than the advertised storage capacity (25,000 mAh).
Flash Pro Plus has intelligent circuitry too, which can detect low power devices (e.g. headphones) and adjust the output voltage accordingly. Flashs Pro Plus has been approved by the TSA (Transportation Security Administration) and EASA (European
Union Aviation Safety Agency) so, you can carry Flash Pro Plus with you
on-board a plane. Flash Pro Plus also comes with third-party testing certification (FC, CE, ROHS, MSDS).
There is a snazzy hardshell zippered case included to store and
safely transport Flash Pro Plus. The hardshell case has been engraved with
Chargeasap raised lettering and has a glossy (water resistant)
outershell with a carbon fiber finish. The zipper is made of fabric so,
it's not water resistant and has a metal slider which opens up the case
clamshell style.
The hardshell is internally lined with soft
fabric material and integrates a tall elastic mesh pocket, as well as an
elastic webbing strap to secure Flash Pro Plus in place and prevent it from shifting inside the case. Flash
Pro Plus does not include an 100 watt cable accessory or 100 watt power
adapter, which are needed to achieve the advertised charging
times. To benefit from SuperVOOC charging, OnePlus Warp Charge, Vivo FlashCharge, Apple FastCharge and HUAWEI SuperCharge, you will need the respective cables from the manufacturers. You can buy the Flash Pro Plus directly from Chargeasap. Check out the review of Connect Pro and Chargeasap's Infinity charging cable.
0 comments